trenas Jumping Pit Cover with Customisable Colour and Logo Print

Water-permeable PVC mesh cover for jumping pits. To ensure the cover remains in place the edge of the cover is comprised of a heavy 6 x 40 mm galvanised steel chain. Colour, size and logo printing are fully customisable.

Selecting the right cover size
To select the right size of your pit cover, first measure the side lengths of the pit. For the cover you should allow for an overlap of about 30 cm in each direction. The required size of the cover is then calculated as follows: (length + 60 cm) x (width + 60 cm). You can then round up the resulting number of squared metres and make your selection in the drop down menu. Enter the desired length and width in the comment field at checkout.

Example: Measuring your jumping pit results in a length of 9 m and a width of 3 m. After adding the overlap you will have 9.6 m x 3.6 m = 34.56 squared metres. This is rounded up to 35 m2, which you can select from the drop down menu. At checkout, enter the desired dimensions of 9.6 m x 3.6 m in the comment field.